Yokogawa ZR402G-P-E-E-A Zirconia Oxygen Analyzer Separate Type ZR402G Converter
Yokogawa's zirconia oxygen analyzers are used for combustion monitoring and control in a wide variety of applications and help industries to make considerable achievements in energy saving. The applications range from energy-consuming industries, such as iron and steel, electric power, oil and petrochemical, ceramics, pulp and paper, food, and textiles, to various combustion facilities, such as incinerators and small- and medium sized boilers. Combustion monitoring and control using the analyzer also contribute to a lowering of CO2, SOx, and NOx emissions by allowing for more complete combustion, thus preventing global warming and air pollution.
The ZR402G converter is equipped with an LCD touch screen which has various setting displays, a calibration display, oxygen concentration trend display, with easier operation and improvement of display functions. The converter is equipped with various standard functions such as measurement and calculation as well as maintenance functions including self-test. The ZR22G separate-type detector uses a high-reliability zirconia sensor, and its heater assembly can be replaced on site. The detector is mounted, for example, on the wall of a flue and can measure the gases directly. The ZR22S separate-type detector for explosion-proof applications is also available.
Features of Yokogawa ZR402G-P-E-E-A Zirconia Oxygen Analyzer Separate Type ZR402G Converter
· The separate type converter ZR402G incorporates a LCD touchscreen for ease of operation.
· The built-in heater assembly of the probe can be replaced on site, reducing maintenance costs (ZR22G only).
· The probe uses a long-life, high-reliability, field replacable Zirconia sensor.
· Remote maintenance using digital communications (HART) reduces maintenance costs.
Note: HART is a registered trademark of HART Communication Foundation.
Specification of Yokogawa ZR402G-P-E-E-A Zirconia Oxygen Analyzer Separate Type ZR402G Converter
|
Measurement object |
Oxygen concentration in combustion exhaust gas and mixed gas |
|
Measurement system |
Zirconium oxide sensor |
|
Measurement range |
0.01 to 100 vol% O2 |
|
Output signal |
4 to 20 mA DC, two points (ZR402G) (maximum load resistance 550Ω) |
|
Setting range |
Any setting in the range of 0 - 5 vol%O2 to 0 - 100 vol%O2 (in 1 vol% O2), or partial range |
|
Digital communication (HART) |
250 to 550Ω, depending on number of field devices connected to the loop (multi-drop mode) |
|
Sample gas pressure |
-5 to +250 kPa (Pressure compensation option necessary over +5 kPa) |
|
Sample gas temperature |
0 to 700℃ (Probe only) |
|
Probe length |
0.15, 0.4, 0.7, 1.0, 1.5, 2.0, 2.5, 3.0, 3.6, 4.2, 4.8, 5.4 m |
|
Contact output |
Four points (one is fail-safe, normally open) |
|
Contact input |
Two points |
|
Calibration |
Method; zero/span calibration |
|
Construction of detector (ZR22G) |
Heater and thermocouple replaceable construction. |
|
Construction of converter (ZR402G) |
Non-explosion-proof, outdoor installation, equivalent to NEMA4X/IP66 |
|
Ambient Temperature |
Probe (ZR22G): -20 to 150℃ |
|
Reference Gas System |
Instrument Air (preferred): 50 kPa (200 kPa with check valve) + the pressure inside the furnace; Approx. 1 Nl/min consumption Natural convection |
|
Power supply |
85 to 264 V AC; 45 to 66 Hz |
Performance of Yokogawa ZR402G-P-E-E-A Zirconia Oxygen Analyzer Separate Type ZR402G Converter
|
Repeatability |
±0.5% Maximum value of set range |
|
Linearity |
±1% Maximum value of set range |
|
Drift |
±2% Maximum value of set range/month |
|
Response time (T90) |
90% response within 5 sec (60 sec for explosion-proof ZR22S) |
We are specialized in intelligent instruments, including : control system, transmitters, flow meters,sensors, recorders, analyzers, control valves, controllers, PLC's, etc.
We mainly supply YOKOGAWA,WEIDMULLER, ABB, MOELLER, SCHNEIDER ElECTIC,FUJI,OMRON,HONEYWELL,SIEMENS,FLUKE,PEPPERL+FUCHS,HIMA,Endress+ Hauser etc.
Why choose us?
1. 100% original product, 100% quality assurance.
If you find a fake. Please contact us without hesitation! We afford the shipment cost! We send you a new product asking zero cent!
2. Varied payment methods.
We adopt T/T, western union and paypal. If you can not trust us , you can choose to pay it via Aliexpress! 100% make your money safe!
3. SHIPPING:
We can shipping all over the world.via DHL,UPS,Fedex,TNT and EMS etc., the packaging is very safe and strong. if you have any special needs,please notify me.
It will take 3 to 7days to reach in your hands.
Packaging:
Imported with original packaging or standard export packing.Customize design is acceptable.
Contact:
HONGKONG XIEYUAN TECH CO., LIMITED
Email:becky@hkxytech.com Web:www.hkxytech.com
Mobile:+86-15972186287(Whatsapp & Wechat)
